Automatic Negative Head RCM3

Salamander positive head pumps require a natural flow of 1 litre per minute to activate the pump. Very low head pressure or negative head systems (where the outlet is below or level with the cold water storage tank) will not be able to acheive this and a negative head kit will be required.

The Salamander RCM kits (remote control modules) are designed to create a fully automatic neagtive head system when accomodated with a positive head pump.

The RCM3 is designed for pumps with closed head pressure (CHP) of 1.20-2.1bar and where the static head to the pump does not exceed 10ft.

Two RCM's should be installed per twin pump and one RCM per single pump

If you require assistance with selecting the correct pump for your needs please contact the Tapstore pump advice line on 0845 064 5907.